Home
FASTPCBA
PCB Board
PCB Assembly
News
QuoteSearch Products
Search News
- [Company News]PCB board assembly common matters2020/04/08/ 15:46
- After the initial soldering of the PCB board, it should be numbered immediately (the last two digits of the year + serial number). Use a marker to clearly write the reserved position on the front of the board.
- Read（0）
- [Company News]Can the PCB board be exported smoothly under the epidemic?2020/03/30/ 15:12
- The coronavirus that has permeated the world is developing rapidly, and the import and export trade of PCB board has been affected to a certain extent.
- Read（0）
- [Company News]The future of PCB assembly for medical prevention and control equipment2020/03/27/ 11:35
- From the primitive social life, to the drilling of wood for fire, the era of farming, to the rise of the industrial age, we have gradually moved towards modernization, technology, and electronics. Looking at the core technology level of all industries, PCB assembly technology plays a pivotal role.
- Read（0）
- [Company News]PCB makers’ transformation path under coronavirus2020/03/25/ 14:00
- The coronavirus in 2020 has lasted for more than three months. At present, China has stabilized the epidemic, but it is the outbreak period abroad. The global economy is affected by the epidemic. Many companies have stopped production. As a pcb maker in China, where is our road to transformation?
- Read（0）
- [Company News]Diy pcb circuit board the five most commonly used methods comparison2019/12/24/ 11:36
- Drawing method is the method with the least tools and the simplest diy pcb circuit board manufacturing process. But the accuracy is not very high.
- Read（0）
- [Company News]In PCB manufacturing dispensing common defects and solutions2019/12/09/ 15:10
- Some drip coating defects often occur in PCB manufacturing, such as wire drawing / tailing, discontinuities in glue dot size, no glue dots, and satellite dots.
- Read（0）
- [Company News]Selective wave soldering advantage2019/11/11/ 15:20
- Selective wave soldering is a special form of wave soldering invented to meet the requirements of modern welding processes. It also has three main components of flux unit, preheating unit and welding unit. Through pre-programmed procedures, the machine can be sprayed and welded in a targeted manner. The welding efficiency and reliability are higher than manual welding, and the welding cost is lower than wave soldering.
- Read（0）
- [Company News]Why does the pcb supplier choose no-clean soldering process?2019/11/05/ 15:50
- With the protection of the atmospheric ozone layer, the in-depth development of Ozone Depleting Substances (ODS) and the rapid development of SMT, more and more pcb suppliers are choosing or preparing to use no-clean soldering technology, low solid content and no-wash.
- Read（0）
- [Company News]Modern electric circuit board components packaging development2019/10/29/ 14:48
- The electric circuit board products are developing towards portable, miniaturized, networked and multimedia. This market demand puts forward corresponding requirements for circuit assembly technology.
- Read（0）
- [Company News]Printed circuit board manufacturers reflow soldering poor wetting solution2019/10/28/ 10:33
- The welding quality of components' solder joints is a key factor that directly affects the quality of printed circuit components and even the whole machine
- Read（0）
- [Company News]SMT PCB assembly process improvement inspection methods2019/10/28/ 10:15
- The goal of quality management is not to put the defective smt pcb assembly printed circuit board on the production line back process, set up special testing equipment after the manufacturing station, and timely detect, find and correct the defects.
- Read（0）
- [Company News]PCB manufacturing lead-free flux main problems and countermeasures2019/10/21/ 15:58
- Lead-free solder pastes and wave soldered water soluble fluxes are also required for certain pcb manufacturing products.
- Read（0）
- [Company News]PCB maker used cleaning agents characteristics2019/10/19/ 15:40
- In general, PCB manufacturers should use a good cleaning agent which have following characteristics.
- Read（0）
- [Company News]Pcb supplier component picking error reason and solution2019/10/18/ 21:11
- Therefore, the pcb supplier should correctly input the "component start position, pitch, component number" of "component data".
- Read（0）
- [Company News]Factors affecting pcb manufacturing wave soldering quality2019/10/18/ 00:38
- There are many factors affecting the quality of pcb manufacturing wave soldering, mainly are production materials, production equipment and production processes.
- Read（0）
- [Company News]Pcba manufacturing pcb maker rework process basic requirements2019/10/15/ 21:10
- Basic requirements for tool using by pcb maker during repair can be concluded at 10 point, more information you can pay attention to our news status, written by [email protected]
- Read（0）
- [Company News]PCB soldering of PCB manufacturers2019/10/14/ 18:37
- PCB soldering ofPCB manufacturers Pcb manufacturing wave soldering principle Wave soldering process and equipment wave soldering was first invented by Fry's Metal Company of the United Kingdom in the 1950s. It is the most mature, most infl...
- Read（0）
- [Company News]What are the factors that affect the printing quality of smt soldering circuit board solder paste?2019/10/10/ 14:20
- In general, there are eight main factors affecting the printing quality of smt soldering circuit board solder paste, namely solder paste, PCB, stencil, printing equipment and fixture, printing process, production environment and professional quality of production staff.
- Read（0）
- [Company News]Pcb manufacturer SMT workshop temperature and humidity requirements2019/09/26/ 11:48
- For manufacturer, SMT processing is to attach an electronic capacitor or resistor to a machine and which become stronger and less likely to fall to the ground during welding.The capacitive resistor that passes high-tech SMT processing is much faster than manual SMT, and not easy to make mistake.
- Read（0）
- [Company News]PCB assembly pad over wave soldering defect analysis and solution2019/09/25/ 10:11
- Why is there a defect in the wave soldering of the PCB assembly pad? The following PCB manufacturers give you an analysis of the causes and solutions.
- Read（0）
Relevant Search
Spotlight
What is difference between PCB and PCBA?
- we know that PCBA gene...
- 1What is circuit board design for manufacturability?
- 253rd Earth Day on April 22, 2022
- 3What are the classifications of dry film photoresists in pcba circuit boards?
- 4What is Halogen Free PCB Board?
- 5How to solve the problem of chip components standing up during SMT assembly?
- 6What are the standards for SMT and DIP assembly of components?
- 7Advantages and disadvantages of PCB flying probe testing
- 82022 Tomb Sweeping Day Holiday
- 9What is MCPCB?
- 10How to distinguish the number of pcb layers?
Building 1, Senyang Electronic Technology Park, Guangming High-tech Park, Yutang Street, Guangming District, Shenzhen City.
F:86-13418481618
