Home
FASTPCBA
PCB Board
PCB Assembly
News
QuoteSearch Products
Search News
- [Company News]PCB manufacturing reliability definition2019/11/12/ 11:05
- Although there is a consensus that reliability is an important attribute of PCB manufacturing products, the definition of reliability and the more popular ones are as follows:
- Read（0）
- [Company News]Selective wave soldering advantage2019/11/11/ 15:20
- Selective wave soldering is a special form of wave soldering invented to meet the requirements of modern welding processes. It also has three main components of flux unit, preheating unit and welding unit. Through pre-programmed procedures, the machine can be sprayed and welded in a targeted manner. The welding efficiency and reliability are higher than manual welding, and the welding cost is lower than wave soldering.
- Read（0）
- [Company News]Why does the pcb supplier choose no-clean soldering process?2019/11/05/ 15:50
- With the protection of the atmospheric ozone layer, the in-depth development of Ozone Depleting Substances (ODS) and the rapid development of SMT, more and more pcb suppliers are choosing or preparing to use no-clean soldering technology, low solid content and no-wash.
- Read（0）
- [Company News]Modern electric circuit board components packaging development2019/10/29/ 14:48
- The electric circuit board products are developing towards portable, miniaturized, networked and multimedia. This market demand puts forward corresponding requirements for circuit assembly technology.
- Read（0）
- [Company News]Printed circuit board manufacturers reflow soldering poor wetting solution2019/10/28/ 10:33
- The welding quality of components' solder joints is a key factor that directly affects the quality of printed circuit components and even the whole machine
- Read（0）
- [Company News]SMT PCB assembly process improvement inspection methods2019/10/28/ 10:15
- The goal of quality management is not to put the defective smt pcb assembly printed circuit board on the production line back process, set up special testing equipment after the manufacturing station, and timely detect, find and correct the defects.
- Read（0）
- [Company News]PCB manufacturing lead-free flux main problems and countermeasures2019/10/21/ 15:58
- Lead-free solder pastes and wave soldered water soluble fluxes are also required for certain pcb manufacturing products.
- Read（0）
- [Company News]PCB maker used cleaning agents characteristics2019/10/19/ 15:40
- In general, PCB manufacturers should use a good cleaning agent which have following characteristics.
- Read（0）
- [Company News]Pcb supplier component picking error reason and solution2019/10/18/ 21:11
- Therefore, the pcb supplier should correctly input the "component start position, pitch, component number" of "component data".
- Read（0）
- [Company News]Factors affecting pcb manufacturing wave soldering quality2019/10/18/ 00:38
- There are many factors affecting the quality of pcb manufacturing wave soldering, mainly are production materials, production equipment and production processes.
- Read（0）
- [Company News]Pcba manufacturing pcb maker rework process basic requirements2019/10/15/ 21:10
- Basic requirements for tool using by pcb maker during repair can be concluded at 10 point, more information you can pay attention to our news status, written by [email protected]
- Read（0）
- [Company News]PCB soldering of PCB manufacturers2019/10/14/ 18:37
- PCB soldering ofPCB manufacturers Pcb manufacturing wave soldering principle Wave soldering process and equipment wave soldering was first invented by Fry's Metal Company of the United Kingdom in the 1950s. It is the most mature, most infl...
- Read（0）
- [Company News]PCB assembly pad over wave soldering defect analysis and solution2019/09/25/ 10:11
- Why is there a defect in the wave soldering of the PCB assembly pad? The following PCB manufacturers give you an analysis of the causes and solutions.
- Read（0）
- [Company News]PCB assembly pcb manufacturers commonly used test methods2019/09/24/ 11:07
- PCB assembly pcb manufacturers commonly used test methods The PCBA test methods commonly used by PCB manufacturers are mainly as follows: 1, Manual testing Manual testing relies directly on visual testing, and pcb manufacturers use vis...
- Read（0）
- [Company News]Basic knowledge of PCB design2019/09/21/ 09:15
- Since the mid-1950s, PCB technology has been widely adopted.At present, PCB has become the "mother of electronic products", and its application is almost permeated in various terminal fields of the electronic industry, including industrial control, medical equipment, automotive electronics, smart home and many other fields.
- Read（0）
- [Company News]PCB prototype Circuit Boards Poor Plating Causes Analysis2019/09/11/ 10:12
- Due to the adsorption of hydrogen on the surface of the plated part and not released that form pinhole on pcb prototype pcb. The plating solution cannot be lubricated on the surface of the plating devices, so that the plating layer cannot be electrolyzed. As the thickness of the coating around the hydrogen evolution point increases, the hydrogen evolution point forms a pinhole. It features as a shiny round hole and sometimes with an upward small tail. When the wetting agent is absent in the plating solution and the current density is high, pinholes are easily formed on pcb prototype circuit board.
- Read（0）
- [Company News]PCB assembly circuit board corrosion solution2019/09/09/ 14:28
- Pcb assembly boards are very common at present, and almost all electronic products need to use PCB boards!
- Read（0）
- [Company News]Pcb manufacturer’s SMT head composition and function analysis2019/08/19/ 14:00
- From the concept of the robot, the Pcb manufacturer’s smt head is an intelligent robot, which automatically adjusts the position through program control, picks up the components as required, and accurately places them on the preset pads to complete the three-dimensional reciprocating motion.
- Read（0）
- [Company News]Flexible pcb manufacturing2019/08/16/ 17:55
- FPC is also called flexible pcb. The PCBA assembly welding process of flexible pcb is very different from the assembly of rigid circuit board. Since the hardness of FPC board is not enough, it is soft. If you don't use special carrier board, you can't fix and transmit. Basic SMT processes such as printing, SMT, and furnace cannot be completed.
- Read（0）
- [Company News]Pcb manufacturer china design connector four key elements2019/08/15/ 14:38
- Generally, for pcb manufacturer china, solder does not provide high-quality mechanical support. The soldering strength of the plug-in solder itself is much strong than that of surface mounting. One is because the plug-in solder has a large cross-sectional area; the other is because the lead is inserted into the through-hole to provide mechanical support.
- Read（0）
Relevant Search
Spotlight
What is difference between PCB and PCBA?
- we know that PCBA gene...
- 1What is circuit board design for manufacturability?
- 253rd Earth Day on April 22, 2022
- 3What are the classifications of dry film photoresists in pcba circuit boards?
- 4What is Halogen Free PCB Board?
- 5How to solve the problem of chip components standing up during SMT assembly?
- 6What are the standards for SMT and DIP assembly of components?
- 7Advantages and disadvantages of PCB flying probe testing
- 82022 Tomb Sweeping Day Holiday
- 9What is MCPCB?
- 10How to distinguish the number of pcb layers?
Building 1, Senyang Electronic Technology Park, Guangming High-tech Park, Yutang Street, Guangming District, Shenzhen City.
F:86-13418481618
